There are two ways to pair the Wink:

I. Pair Using Bluetooth: The app will automatically search for nearby locks. Make sure your desired lock is turned on.

Open your igloohome APP

1. Tap [Pair lock or device]

2. Select the Bluetooth ID (Wink) from the list

3. Tap [Pair].

4. The app will begin onboarding the Wink.

5. The status LED will blink blue.

6. The LED will blink green once successfully paired

Note: The device must be in pairing mode, and the device will continue to show a red light until at least one face is registered.

II. Pair Manually: If no locks were found during the search, you can add the lock manually.

Open your igloohome APP

1. Tap [Pair lock or device]

2. Select [Wink] under Reader

3. Tap [Pair].

4. The app will begin onboarding the Wink.

5. The status LED will blink blue.

6. Confirm your selection by choosing [Finish Pairing].

7. The LED will blink green once successfully paired.